Getting into guitar pedals

person stepping on guitar pad

Photo by Frankie Lopez on Unsplash

Pedals are where a lot of guitarists find their sound, and also where a lot of money disappears into duplicates. A tuner, an overdrive, a delay and a reverb, powered properly on a small board, cover most of the music you'll ever play. Here's which to buy first, what order they go in, and how to stop chasing the next one.

00

The short version

Starter budget
$135 to $465
How hard
Easy to start
Day one
Order a tuner and an overdrive.

Buy these three first:

01

Before you buy anything

Buy in this order: tuner, overdrive, delay, reverb.

That covers most styles from blues to rock to ambient. Fuzz, modulation, compression and the rest are flavors to add once you know what's missing from your sound.

Power matters more than people think.

Use an isolated power supply rated for every pedal's current draw, not a daisy chain from one wall adapter. Digital pedals like delays and reverbs draw more current and are the usual cause of hum and noise when underpowered.

Try before you buy, and buy used.

Pedals hold their value, so buying used and reselling what you don't love costs very little. A pedal that sounds amazing in a demo video may not suit your guitar and amp.

02

Tuners

A pedal tuner is the first thing on every board. Stepping on it mutes your signal so you can tune silently between songs. Polyphonic tuners let you strum all strings at once and see which are out. A tuner with a buffer also helps keep your tone bright when you run long cables and lots of true-bypass pedals.

PolyTune 3 Polyphonic Tuner with Buffer
Best starter $63.90 as of Nov 5, 2026 ★★★★★ our rating In Stock
TC Electronic

PolyTune 3 Polyphonic Tuner with Buffer

A tiny tuner that reads all six strings at once, with chromatic and strobe modes and a switchable buffer to keep your tone from going dull over long cable runs. About $64. 2,200+ reviews at 4.7 stars.

We like

  • Strum all strings, see which are off
  • Built-in buffer, switchable on or off
  • Mini size saves board space

Know this

  • Small display is harder to read in sunlight
  • No power output for other pedals
TU-3 Compact Chromatic Tuner
Upgrade pick $89.99as of Nov 5, 2026 ★★★★
BOSS

TU-3 Compact Chromatic Tuner

The tank-tough tuner on stages everywhere, with a bright 21-segment display, high-brightness mode and a power output that can run a few other pedals. About $90.

We like

  • Bright, easy-to-read display
  • Built like a tank
  • Can power other pedals in a pinch

Know this

  • Bigger than mini tuners
  • One string at a time
03

Overdrive

Overdrive gives you the warm grit of a cranked amp at any volume, and it's the pedal you'll use most. Low-gain overdrives also push an already-dirty amp harder for solos. The Boss SD-1 and Ibanez Tube Screamer are the two classics; nearly every overdrive on the market is compared to them.

red and black distortion pedal

Photo by Anton Shuvalov on Unsplash

SD-1 Super Overdrive
Best starter $69.99 as of Nov 5, 2026 ★★★★★ our rating In Stock
BOSS

SD-1 Super Overdrive

A $70 overdrive that's been on pro pedalboards for decades: warm, mid-focused grit that works in front of a clean amp or to push a dirty one. Built to survive being stomped. 3,200+ reviews.

We like

  • Classic, versatile overdrive sound
  • Boss buffered bypass keeps tone bright
  • Nearly indestructible

Know this

  • Mid-heavy, not for high-gain metal
  • Three knobs only, no tone shaping beyond that
TS9 Tube Screamer
Upgrade pick $99.99as of Nov 5, 2026 ★★★★
Ibanez

TS9 Tube Screamer

The original Tube Screamer circuit, beloved for blues and rock leads, for about $100. Smoother and a little brighter than the SD-1. 4.8 stars.

We like

  • The classic Tube Screamer tone
  • Smooth, singing leads
  • Pairs well with dirty amps

Know this

  • Cuts bass, not everyone's taste
  • Costs more than the SD-1
04

Delay

Delay repeats what you play, from a quick slapback echo to long, spacious repeats. It goes after overdrive. Digital delays are clean and versatile; analog-voiced modes sound darker and warmer. Look for tap tempo so the repeats match the song.

Flashback 2 Delay
Best starter $119.00 as of Nov 5, 2026 ★★★★★ our rating In Stock
TC Electronic

Flashback 2 Delay

A versatile delay with a range of modes including analog-style, tape and crystal, plus TC's pressure-sensitive MASH footswitch for expressive control, about $119. 780+ reviews.

We like

  • Lots of delay types in one pedal
  • MASH footswitch adds expression
  • TonePrint presets from pros

Know this

  • Tap tempo needs a press-and-hold trick
  • Often low in stock
DD-8 Digital Delay
Upgrade pick $168.88as of Nov 5, 2026 ★★★★
BOSS

DD-8 Digital Delay

Boss's flagship compact delay: eleven modes, stereo in and out, up to 10 seconds of delay and a looper. About $169. The one you won't outgrow.

We like

  • Eleven modes including tape and shimmer
  • Stereo in and out
  • Built-in looper

Know this

  • Costs more
  • Menu of modes takes time to learn
05

Reverb

Reverb adds space, like playing in a room, a hall or with a vintage spring tank. It's usually the last pedal before the amp. Even if your amp has reverb, a pedal gives you more types and more control.

Hall of Fame 2 Reverb
Best starter $129.00 as of Nov 5, 2026 ★★★★★ our rating In Stock
TC Electronic

Hall of Fame 2 Reverb

A compact reverb with spring, hall, plate, shimmer and more, plus the MASH footswitch and TonePrint presets, about $129. 580+ reviews at 4.7 stars.

We like

  • Many reverb types in one pedal
  • Shimmer and spring both sound great
  • TonePrint presets from pros

Know this

  • Small knobs are fiddly on stage
  • Some modes are subtle
Atmosphere Digital Reverb, 9 Modes
Budget pick $79.99as of Nov 5, 2026 ★★★★
JOYO

Atmosphere Digital Reverb, 9 Modes

Nine reverb modes including spring, plate and shimmer for about $80. A cheap way to find out which reverb sounds you like.

We like

  • Nine reverb types
  • Trail function keeps the tail when switched off
  • About $80

Know this

  • Less polished than TC or Boss
  • Noisier at extreme settings
06

Power Supplies

Each pedal needs clean power. An isolated power supply gives every pedal its own output, which kills most hum and noise. Check each pedal's voltage (usually 9V) and current draw in milliamps, and make sure the supply has enough. Avoid running digital pedals off a daisy chain.

DP-1 Guitar Power Supply, 10 Isolated Outputs
Best starter $39.99 as of Nov 5, 2026 ★★★★★ our rating In Stock
Donner

DP-1 Guitar Power Supply, 10 Isolated Outputs

Ten isolated outputs for 9, 12 or 18 volt pedals, with short-circuit protection and cables included, for about $40. 7,900+ reviews. The supply most first boards use.

We like

  • Ten isolated outputs
  • Powers 9V, 12V and 18V pedals
  • Cables included

Know this

  • Check high-draw pedals fit its outputs
  • Bulky on a tiny board
10 Isolated DC Output Power Supply with USB
Specialty pick $56.99as of Nov 5, 2026 ★★★★
Mosky

10 Isolated DC Output Power Supply with USB

Ten isolated outputs including higher-current 500 mA outputs for hungry digital pedals, plus a USB port, about $57.

We like

  • 500 mA outputs for digital pedals
  • USB port for a light or phone
  • Ten isolated outputs

Know this

  • Costs more
  • Fewer reviews
07

Boards and Cables

A pedalboard holds everything in place and lets you set up in a minute instead of ten. Start small; four pedals and a tuner fit on a 15 inch board. Short right-angle patch cables save space and reduce noise. The board's size naturally limits how many pedals you buy, which isn't a bad thing.

Aluminum Pedalboard, 14.9 x 5.5 Inch, with Bag
Best starter $27.99 as of Nov 5, 2026 ★★★★★ our rating In Stock
Ghost Fire

Aluminum Pedalboard, 14.9 x 5.5 Inch, with Bag

A light aluminum board that fits four or five compact pedals, with hook-and-loop tape and a carry bag, about $28. 2,100+ reviews.

We like

  • Fits the core four plus a tuner
  • Light, with a carry bag
  • About $28

Know this

  • No room under it for a big power supply
  • Fills up fast
Aluminum Pedalboard, 19.8 x 11.5 Inch, with Bag
Upgrade pick $49.99as of Nov 5, 2026 ★★★★
Ghost Fire

Aluminum Pedalboard, 19.8 x 11.5 Inch, with Bag

A two-row board with room for eight or more pedals and a power supply underneath, about $50. Get this if you know your board will grow.

We like

  • Two rows, room to grow
  • Space under for a power supply
  • Carry bag included

Know this

  • Bigger to carry
  • Invites buying more pedals
Right-Angle Guitar Patch Cables, 6 Inch, 6 Pack
Specialty pick $16.16as of Nov 5, 2026 ★★★★
Amazon Basics

Right-Angle Guitar Patch Cables, 6 Inch, 6 Pack

Six short right-angle patch cables for about $16 to link pedals neatly. 3,600+ reviews.

We like

  • Six cables for about $16
  • Right-angle plugs save space
  • Short runs reduce noise

Know this

  • Six inches is too short for some layouts
  • Thicker than flat cables
08

Building your first pedalboard, one pedal at a time

The best first pedalboard is built slowly. Here's the order to add pedals, how to set each one so it actually helps your playing, and how to power and wire the board so it stays quiet.

assorted-colored electric guitar effects

Photo by Kelly Sikkema on Unsplash

Most guitarists’ first boards end up as a pile of pedals that sound great alone and muddy together. The fix is adding one pedal at a time and learning each before buying the next. Here’s the order that works.

Step 1: Tuner, then overdrive

Put the tuner first in the chain. Then add an overdrive and spend a few weeks with just those two.

Set the overdrive like this:

  • Level so the pedal on is about as loud as off. That’s called unity gain.
  • Drive low at first. A little grit goes a long way, especially with a band.
  • Tone at noon, then adjust to your guitar and amp.

Try it two ways: with a clean amp for crunch, and with a slightly dirty amp, drive low and level up, to push it harder for solos. Learning this one pedal well teaches you more than buying three.

Orange guitar effects pedal with cables
Photo by Kedibone Isaac Makhumisane on Unsplash

Step 2: Add a delay

Delay goes after overdrive. Start with a short, single repeat (slapback) for country and rockabilly, or a medium delay mixed low to thicken leads. Use tap tempo to match the song.

The common beginner mistake is too many repeats, too loud. Turn the mix down until you barely hear the delay, then up a touch. It should sound bigger, not echoey.

Step 3: Add a reverb

Reverb goes last, before the amp. Spring sounds vintage and surfy, hall and plate sound big and smooth, and shimmer adds an octave-up halo for ambient playing. Like delay, less is usually more in a band; you can go wild at home.

a close-up of a guitar
Photo by Vladislav Glukhotko on Unsplash

Step 4: Power and wire it properly

Now put everything on a board. Mount the pedals with hook-and-loop tape in the signal order: tuner, overdrive, delay, reverb. Link them with short patch cables and power each pedal from its own output on an isolated power supply.

If you hear hum, check three things: that no pedal is on a daisy chain, that the supply has enough current for your digital pedals, and that power cables aren’t running right alongside audio cables.

What not to worry about yet

Don’t buy a fifth pedal until you’ve used the first four for a month. Don’t chase boutique versions of the same overdrive circuit. And don’t forget the best tone pedal of all is your hands. A small, well-tuned board you know inside out beats a giant one you don’t.

09

What you don't need yet

Beginners get pressured to buy a lot of stuff that doesn't help them. Here's what we'd skip on day one.

  • A multi-effects unit Great value, but menus can bury the fun. Individual pedals teach you what each effect does.
  • A boutique overdrive Learn what you like on a classic first. Most boutique pedals are variations on the same circuits.
  • A loop switcher Useful for big boards. Four pedals don't need one.
  • Expensive cables Solid, well-made cables matter; exotic ones don't. Buy decent and move on.
  • Every modulation pedal Chorus, phaser and flanger are fun later. Start with the core four.
10

Your first seven days

A short, real plan to get from gear-on-doorstep to actually doing it.

  1. Order a tuner and an overdrive.
  2. Set the overdrive's level so it's about the same volume as off, then adjust drive and tone.
  3. Learn the standard signal chain order before adding more pedals.
  4. Order an isolated power supply before your third pedal.
  5. Play one song all week using only your tuner and overdrive. Learn its range first.
  6. Watch side-by-side comparisons before choosing a delay or reverb.
11

What it costs

Budget start
$135
Typical
$465

A tuner and one great overdrive is about $135 and already changes how you sound. The core four (tuner, overdrive, delay, reverb) with an isolated power supply, a small board and patch cables comes to around $465.

12

Common questions

What guitar pedals should a beginner buy first?

A tuner, then an overdrive. After that, a delay and a reverb. Those four cover most music. Add fuzz, modulation or compression once you know what your sound is missing.

What order should guitar pedals go in?

A common order is tuner, compressor, overdrive or distortion, modulation, delay, then reverb, before the amp. It's a guideline, not a law; experiment once you know the basics.

What's the difference between true bypass and buffered pedals?

True bypass pedals connect input to output directly when off. With many of them and long cables, your tone can get dull. A buffered pedal, like most Boss pedals or a tuner with a buffer, keeps your signal strong. One good buffer early in the chain is usually enough.

Do I need an isolated power supply?

Once you have more than two pedals, yes. Isolated outputs prevent hum and noise, especially with digital delays and reverbs. Check that the supply has enough current for every pedal.

Are cheap pedals any good?

Many are. Budget brands make decent clones of classic circuits. The difference is usually durability, noise and switch quality, not tone. Buying used name-brand pedals is often the best value.

Overdrive vs distortion vs fuzz?

Overdrive is mild and amp-like. Distortion is heavier and more compressed. Fuzz is thick, buzzy and vintage. Most players start with overdrive because it's the most versatile.

Browse by category
Authoritative sources
  • That Pedal Show (YouTube) Two guitarists comparing pedals side by side, honestly. Watch before you buy and save yourself a lot of returns.
  • Premier Guitar Long-running gear magazine with pedal reviews, rig rundowns and signal-chain explainers.
  • r/guitarpedals Huge community for board layouts, power questions and second-hand deals.