Getting into machine embroidery

Home embroidery machine stitching a green design on white fabric

Photo by Omar Alrawi on Unsplash

An embroidery machine stitches a design for you while you choose the fabric, the thread colors and the stabilizer underneath. That last part decides whether your designs come out crisp or puckered. Here's how to choose between an embroidery-only and a combo machine, which hoop size you need, and the supplies that make the first projects work.

00

The short version

Starter budget
$570 to $730
How hard
Some practice
Day one
Order a machine, tear-away stabilizer, a thread set and embroidery needles.

Buy these three first:

01

Before you buy anything

Decide whether you also want to sew.

A combo machine sews and embroiders, so it's one purchase and one footprint. An embroidery-only machine is cheaper if you already own a sewing machine you like.

Hoop size limits design size.

A 4x4-inch hoop fits logos, monograms and patches. A 5x7 lets you stitch larger designs on shirts and tote bags without splitting them. Machines with bigger hoops cost much more, so be honest about what you'll make.

Check the file format.

Brother machines use PES files, Janome uses JEF, and so on. Most design shops sell every format, but always download the one your machine reads.

02

Embroidery Machines

A home embroidery machine moves a hoop under the needle to stitch a digital design. The key differences are hoop size, whether it also sews, and how you load designs: USB stick or wireless. Brother dominates the beginner market, which means lots of tutorials, compatible hoops and cheap supplies. A 4x4 machine is plenty to learn on.

A sewing machine needle creating white stitches on dark fabric

Photo by PJ Wallace on Unsplash

Two kinds of embroidery machines, compared

Combo sewing and embroidery

One machine that sews and embroiders. Best if you don't own a sewing machine.

Typical price
$500-1,300
Hoop size
4x4 or 5x7
Also sews
Yes

Best for New makers who want to sew and embroider
Trade-off You can't sew while a long design is stitching

See our pick
Embroidery only

Cheaper for the same hoop size if you already own a sewing machine.

Typical price
$450-1,100
Hoop size
4x4 or 5x7
Also sews
No

Best for Sewists adding embroidery to their setup
Trade-off Does one job only, so a second machine to store

See our pick
SE700 Sewing and Embroidery Machine
Best starter $579.99 as of Nov 6, 2026 ★★★★★ our rating In Stock
Brother

SE700 Sewing and Embroidery Machine

Sews and embroiders, with a 4x4 hoop, 135 built-in designs, a 3.7-inch color touchscreen and wireless transfer from your computer or the Artspira app. Auto needle threader too. About $580. 1,000+ reviews at 4.5 stars.

We like

  • Sews and embroiders in one machine
  • Wireless design transfer
  • Huge tutorial base for Brother

Know this

  • 4x4 hoop only
  • Not built for heavy fabrics like denim seams
PE535 Embroidery Machine
Budget pick $490.00as of Nov 6, 2026 ★★★★
Brother

PE535 Embroidery Machine

Embroidery only, with a 4x4 hoop, 80 built-in designs, 9 fonts, a 3.2-inch touchscreen and USB design loading. The cheapest way into Brother embroidery if you already sew. About $490. 1,700+ reviews at 4.5 stars.

We like

  • Lowest price for a 4x4 Brother
  • Simple to learn

Know this

  • No sewing
  • USB only, no wireless
PE800 Embroidery Machine, 5x7 Hoop
Upgrade pick $1,099.88as of Nov 6, 2026 ★★★★
Brother

PE800 Embroidery Machine, 5x7 Hoop

Embroidery only with a 5x7 hoop, the size that fits most shirt fronts, tote bags and bigger patches without splitting designs. 138 built-in designs and 11 fonts. About $1,100. 2,700+ reviews at 4.6 stars.

We like

  • 5x7 hoop for bigger designs
  • Lots of built-in designs and fonts

Know this

  • About twice the price of a 4x4 machine
  • No sewing
03

Stabilizers

Stabilizer is the backing hooped with your fabric so it doesn't stretch or pucker while thousands of stitches go in. Tear-away suits stable woven fabrics like cotton and canvas and tears off after. Cut-away stays in permanently and is the must for stretchy knits like T-shirts. Water-soluble dissolves and is used for lace and as a topper on towels.

Tear Away Embroidery Stabilizer, 10 inch x 25 Yard Roll
Best starter $14.99 as of Nov 6, 2026 ★★★★★ our rating In Stock
New brothread

Tear Away Embroidery Stabilizer, 10 inch x 25 Yard Roll

A medium-weight tear-away that handles most woven fabrics, in a 10-inch roll that fits 4x4 and 5x7 hoops. Plenty for dozens of projects. About $15. 14,000+ reviews at 4.8 stars.

We like

  • Tears away cleanly after stitching
  • Roll size fits common hoops
  • Lasts a long time

Know this

  • Not enough support for T-shirts and knits
Cut Away Embroidery Stabilizer, 10 inch x 50 Yard Roll
Specialty pick $25.99as of Nov 6, 2026 ★★★★
New brothread

Cut Away Embroidery Stabilizer, 10 inch x 50 Yard Roll

The stabilizer for T-shirts, sweatshirts and anything stretchy. It stays behind the design for good, so it keeps stitching flat through washing and wear. About $26.

We like

  • Prevents puckering on knits
  • Big 50-yard roll

Know this

  • Shows slightly through thin fabrics
Solvy Water Soluble Stabilizer, 9 Yards
Specialty pick $15.99as of Nov 6, 2026 ★★★★
Sulky

Solvy Water Soluble Stabilizer, 9 Yards

A clear film that dissolves in water. Lay it on top of towels and fleece so stitches don't sink into the pile, or use it alone for freestanding lace. About $16.

We like

  • Disappears completely in water
  • Keeps stitches on top of towels

Know this

  • Damp hands or humidity make it sticky
505 Spray and Fix Temporary Fabric Adhesive
Upgrade pick $24.99as of Nov 6, 2026 ★★★★
Odif

505 Spray and Fix Temporary Fabric Adhesive

A light mist bonds fabric to stabilizer so nothing shifts in the hoop, and it lets you float items too small or awkward to hoop. Washes out and doesn't gum up the needle. About $25.

We like

  • Stops fabric shifting
  • Makes floating small items easy

Know this

  • Spray away from the machine; overspray is sticky
04

Embroidery Thread

Machine embroidery thread is thinner and shinier than sewing thread, usually 40-weight polyester or rayon. Polyester is the better first choice: strong, colorfast and bleach resistant. A starter set covers most designs; you can match each color in a design file to the closest spool. Use a lighter 60 or 90-weight thread in the bobbin.

63 Colors Polyester Embroidery Machine Thread
Best starter $37.38 as of Nov 6, 2026 ★★★★★ our rating In Stock
New brothread

63 Colors Polyester Embroidery Machine Thread

63 spools of 40-weight polyester, 500 meters each, with a color chart so you can match each color in a design file. Strong, shiny and colorfast. About $37. 4,300+ reviews at 4.8 stars.

We like

  • Comes with a color chart
  • Strong polyester, rarely breaks
  • Enough colors for most designs

Know this

  • 500-meter spools run out on big fills
30 Colors Polyester Embroidery Machine Thread
Budget pick $18.04as of Nov 6, 2026 ★★★★
New brothread

30 Colors Polyester Embroidery Machine Thread

The same thread in a smaller 30-color set for about $18. Enough for monograms, names and simple designs while you learn.

We like

  • Half the price of the 63-color set
  • Covers basic colors

Know this

  • You'll substitute colors on detailed designs
05

Needles and Bobbins

Embroidery needles have a larger eye and a special scarf so fast-moving thread doesn't shred. Size 75/11 suits most fabrics. Change the needle every 8 to 10 hours of stitching, or sooner if thread starts breaking. Prewound bobbins save time and give smoother, more even tension than winding your own.

Embroidery Machine Needles, Size 75/11, 5 Cards
Best starter $20.25 as of Nov 6, 2026 ★★★★★ our rating In Stock
SCHMETZ

Embroidery Machine Needles, Size 75/11, 5 Cards

Twenty-five embroidery needles in the size that fits most projects. Schmetz is the brand most machine makers recommend. About $20. 1,500+ reviews at 4.8 stars.

We like

  • Fits every home embroidery machine
  • 25 needles lasts a long time

Know this

  • One size only; heavy fabrics need a 90/14
Gold Embroidery Needles, Titanium Coated, 75/11
Upgrade pick $7.78as of Nov 6, 2026 ★★★★
SCHMETZ

Gold Embroidery Needles, Titanium Coated, 75/11

A titanium coating keeps the needle sharper for longer and resists the sticky buildup from spray adhesive and dense designs. About $8 for a card of five.

We like

  • Lasts longer than standard needles
  • Resists adhesive buildup

Know this

  • Costs more per needle
Prewound Bobbins, Size A SA156, White, 25 Pack
Budget pick $8.99as of Nov 6, 2026 ★★★★
New brothread

Prewound Bobbins, Size A SA156, White, 25 Pack

Twenty-five ready-to-use bobbins in Brother's size A (SA156) format. Even tension straight out of the pack and no time spent winding. About $9. 4,900+ reviews at 4.7 stars.

We like

  • Saves winding time
  • Smooth, even tension

Know this

  • White only; dark designs may want black bobbins
06

Scissors

You'll trim jump stitches, the little threads that connect parts of a design, after almost every project. Double-curved scissors let you snip close to the fabric while it's still in the hoop without poking a hole. Small, sharp micro-tip scissors handle trimming stabilizer and threads on the back.

5-Inch Double Curved Scissors (5130DC)
Best starter $19.69 as of Nov 6, 2026 ★★★★★ our rating In Stock
Kai

5-Inch Double Curved Scissors (5130DC)

The bend lets you trim jump stitches flat against the fabric, even inside the hoop. Very sharp Japanese steel that cuts cleanly right to the tip. About $20. 990+ reviews at 4.7 stars.

We like

  • Trims close without nicking fabric
  • Works while still hooped

Know this

  • Too small for cutting fabric or stabilizer sheets
5-Inch Micro-Tip Fabric Scissors
Budget pick $14.99as of Nov 19, 2026 ★★★★
Fiskars

5-Inch Micro-Tip Fabric Scissors

Sharp, pointed scissors for trimming threads and cutting stabilizer close to the stitches on the back. About $16. 4,300+ reviews at 4.8 stars.

We like

  • Sharp fine tips
  • Comfortable for small hands

Know this

  • Straight blades can't trim as close on the front
07

Your first month of machine embroidery

The machine does the stitching. Your job is hooping, choosing stabilizer and preparing designs. Here's a four-week plan that takes you from a test scrap to a T-shirt you'd actually wear.

Close-up of a person operating an embroidery machine

Photo by Levi Gatimu on Unsplash

Most embroidery problems, like puckering, thread breaks and designs that come out crooked, happen before the machine starts. They come from hooping and stabilizer. Spend your first month getting those two right on easy fabrics, and harder projects get much easier.

Week 1: Hooping and test stitch-outs

Start with plain, medium-weight cotton: an old pillowcase or quilting cotton. Cut a piece of tear-away stabilizer a little bigger than the hoop.

  1. Loosen the outer hoop’s screw. Lay the stabilizer, then the fabric, over it.
  2. Press the inner hoop in, then tighten the screw. Tug the fabric gently so it’s smooth and tight like a drum, without stretching it out of shape.
  3. Attach the hoop, pick a built-in design and stitch it.

Watch the first color closely. The machine stops at each color change so you can rethread. When it’s done, trim the jump stitches with curved scissors, take the fabric out and tear away the stabilizer. Do this with three or four designs this week.

Shirts hooped tight under embroidery needles
Photo by Mohd Fikri on Unsplash

Week 2: Stabilizer and placement

Now try the same design three ways: on cotton with tear-away, on a knit scrap with tear-away, and on a knit scrap with cut-away. You’ll see why knits need cut-away: the tear-away version puckers and distorts.

Then practice placement. Mark the center of your design area with a washable fabric marker and two crossing lines. Line those up with the marks on the inner hoop. Most machines also let you move the design on screen and trace its outline before stitching, which helps you check position.

Week 3: Loading designs and towels

Download a purchased or free design in your machine’s format, such as PES for Brother, and load it with a USB stick or wireless transfer. Check the design size fits your hoop before buying.

Try a towel this week. Hoop it with tear-away, then lay a sheet of water-soluble stabilizer on top so the stitches sit on the pile instead of sinking in. Tear and rinse away the extra afterward.

a group of cards
Photo by arash hassan on Unsplash

Week 4: Your first T-shirt

Turn the shirt inside out and spray a piece of cut-away stabilizer lightly with temporary adhesive. Smooth it onto the back of the design area. Turn the shirt right side out and hoop it without stretching the knit. A design about 3 to 4 inches wide sits well on the left chest.

Slow the machine down for knits if your model allows it. After stitching, trim the cut-away about 1/4 inch from the design, leaving it in place for good. Wash the shirt inside out.

What not to worry about yet

Don’t worry about digitizing your own designs, multi-hoop layouts or caps. Don’t buy every stabilizer and specialty thread. Learn to hoop well on cotton and knits, and most projects will just work.

08

What you don't need yet

Beginners get pressured to buy a lot of stuff that doesn't help them. Here's what we'd skip on day one.

  • Digitizing software Turning artwork into stitch files is its own skill. Start with built-in designs and inexpensive purchased files.
  • A multi-needle machine They cost thousands and suit small businesses. Learn on a single-needle home machine first.
  • Extra hoops and magnetic hoops Use the hoop that comes with the machine until hooping feels easy, then add sizes you actually need.
  • Every type of stabilizer Tear-away and cut-away cover most fabrics. Add water-soluble when you start towels or lace.
09

Your first seven days

A short, real plan to get from gear-on-doorstep to actually doing it.

  1. Order a machine, tear-away stabilizer, a thread set and embroidery needles.
  2. Read the manual's hooping section, then hoop a scrap of plain cotton with tear-away stabilizer, drum tight.
  3. Stitch a built-in design on the scrap and watch the machine stop for each color change.
  4. Trim jump stitches, tear away the stabilizer and look at the back to check tension.
  5. Monogram a plain cotton tote bag or a dish towel as your first real project.
  6. Browse a design library and download one design in your machine's format.
10

What it costs

Budget start
$570
Typical
$730

A 4x4 embroidery machine plus tear-away stabilizer, a starter thread set, needles and bobbins comes to about $570. Choose the sewing-and-embroidery combo and add cut-away stabilizer, spray adhesive and curved scissors and you're near $730.

11

Common questions

Should I get an embroidery-only or a combo machine?

If you don't own a sewing machine, a combo like the Brother SE700 is the better value. If you already sew on a machine you like, an embroidery-only machine costs less for the same hoop size.

Is a 4x4 hoop big enough?

For learning, monograms, names, patches and small logos, yes. If you want large designs on shirt fronts, bags or jacket backs, a 5x7 hoop is worth the extra cost from the start.

Why is my embroidery puckering?

Usually the wrong or too little stabilizer, or fabric hooped loosely. Use cut-away for knits, hoop the fabric and stabilizer drum tight, and don't stretch the fabric while hooping.

Where do I get embroidery designs?

Your machine has built-in designs. Beyond those, design shops and marketplaces sell files for a few dollars each. Always download the file format your machine uses, such as PES for Brother.

Can I use regular sewing thread for machine embroidery?

It works in a pinch, but regular thread is duller and breaks more at embroidery speeds. Use 40-weight polyester or rayon embroidery thread on top and lightweight bobbin thread underneath.

Is machine embroidery hard to learn?

The machine does the stitching, so the learning is in hooping, choosing stabilizer and prepping files. Most people stitch a good-looking design in their first week and get reliably clean results within a month.

Browse by category
Authoritative sources