So you want to etch glass

Etching cream turns clear glass frosted wherever it touches, so with a stencil you can put a name, a monogram or a pattern on a glass, a jar or a mirror in an afternoon. Here's what cream to buy, how to cut stencils by hand or with a cutting machine, which glass etches well, the safety gear you need for an acid product, and when a rotary engraver makes more sense.

00

The short version

Starter budget
$40 to $90
How hard
Easy to start
Day one
Buy a small bottle of etching cream, nitrile gloves and safety glasses.

Buy these three first:

01

Before you buy anything

Etching cream is an acid product.

Most creams use ammonium or sodium bifluoride, which can burn skin and eyes and gives off fumes. Wear nitrile gloves and eye protection, work near an open window or fan, and keep it away from kids, pets and food prep areas. Rinse any skin contact with lots of running water right away.

Not all glass etches the same.

Ordinary soda lime glass, like most drinking glasses, jars, vases and mirrors, frosts evenly. Borosilicate glass such as Pyrex and some coated or tempered glass etch weakly or blotchy. Test a spot on the bottom first.

The stencil does most of the work.

Clean edges come from a stencil that is pressed down hard with no bubbles or lifted corners. Adhesive stencil vinyl cut by hand or on a Cricut or Silhouette gives the sharpest results.

Cream works on flat or gently curved surfaces.

For tight curves, fine shading or deep cuts, a rotary engraver or sandblasting is the better tool. Most people start with cream because it is cheap and quick.

02

Etching cream

Etching cream is a thick paste that eats a thin layer off the glass surface and leaves it frosted. You brush it on over a stencil, wait a few minutes, and rinse it off. Most creams contain bifluoride salts, so they need gloves, eye protection and ventilation. A 3 oz bottle covers dozens of small designs if you only put it where the stencil is open. Some creams can be scraped back into the jar and reused.

Glass Etching Cream, 2.8 oz
Best starter $13.99 as of Nov 19, 2026 ★★★★★ our rating In Stock
Armour Etch

Glass Etching Cream, 2.8 oz

The cream most beginners start with and most tutorials are written for. It works fast, frosts ordinary glass evenly, and the small bottle is enough to learn on before you commit to a bigger jar. Sold by TuSu Goods. About $13.99, 4.6 stars from 9,938 ratings.

We like

  • Works in a few minutes
  • Easy to find
  • Most tutorials use it

Know this

  • Acid product, needs gloves and ventilation
Glass Etching Cream, 10 oz, with Brushes
Upgrade pick $29.99as of Nov 19, 2026 ★★★★
Armour Etch

Glass Etching Cream, 10 oz, with Brushes

The same cream in a bigger jar. Worth it once you are etching sets of glasses, jars for gifts or larger panels, and the cost per ounce drops a lot. Keep the lid tight. Sold by TuSu Goods. About $30, 4.6 stars from 2,042 ratings.

We like

  • Lower cost per ounce
  • Enough for big batches

Know this

  • Too much for a first try
Etching Creme, 4 oz
Specialty pick $29.99as of Nov 19, 2026 ★★★★
etchall

Etching Creme, 4 oz

A slower cream you leave on for about 15 minutes, then scrape back into the jar and reuse. Good for large designs where you want lots of cream on the glass without wasting it. Sold by WeSupplyDIY. About $30, 4.6 stars from 513 ratings.

We like

  • Reusable
  • Even results on big areas

Know this

  • Slower than Armour Etch
  • Costs more up front
03

Stencils and resist

The stencil decides how clean your edges look. Adhesive stencil vinyl sticks tight to glass so cream can't creep under, and it peels off without residue. You can cut it with a craft knife or a cutting machine like a Cricut or Silhouette. Premade reusable stencils are the fastest way to start. Regular permanent vinyl works in a pinch, but it leaves more residue and can lift on curves.

Oramask 813 Stencil Film, 12 in x 20 ft
Best starter $22.99 as of Nov 19, 2026 ★★★★★ our rating In Stock
ORACAL

Oramask 813 Stencil Film, 12 in x 20 ft

A low-tack translucent stencil film made for painting and etching. It cuts cleanly by hand or by machine, you can see through it to line up your design, and it comes off glass without sticky residue. Sold by VViViD Vinyl. About $23, 4.5 stars from 3,786 ratings.

We like

  • Peels off clean
  • See-through for alignment
  • Cuts well by machine

Know this

  • Needs transfer tape for detailed designs
Over N Over Reusable Stencil, Full Alphabet
Budget pick $9.95as of Nov 19, 2026 ★★★★
Armour Etch

Over N Over Reusable Stencil, Full Alphabet

Premade reusable adhesive letter stencils. Press them onto glass, etch, peel and reuse. No cutting needed, so you can etch initials on your first night and learn how cream behaves before you make your own. Sold by Plus One Products. About $9.95, 4.4 stars from 141 ratings.

We like

  • No cutting needed
  • Reusable

Know this

  • Limited designs
Value Transfer Tape, 12 in x 15 ft
Specialty pick $10.99as of Nov 19, 2026 ★★★★
Cricut

Value Transfer Tape, 12 in x 15 ft

Transfer tape lifts a weeded stencil off its backing and puts it on the glass in one piece. It keeps the small parts of letters, like the middle of an O, in place while you position it. Sold by Amazon. About $10.99, 4.4 stars from 2,054 ratings.

We like

  • Keeps letters aligned
  • Works with any stencil vinyl

Know this

  • Can be too sticky on low-tack film
04

Cutting and applying tools

You need a sharp blade to cut stencils, a hook to weed out small pieces, and something flat to press the stencil down. A foam brush or plastic spatula spreads cream thick and even. Avoid metal brushes in cream. A self-healing cutting mat protects your table and helps the blade glide. Change craft knife blades often, since a dull tip tears vinyl and leaves ragged edges.

A cutting mat covered with crafting supplies

Photo by Compagnons on Unsplash

Basic Tool Set, 5 Piece
Best starter $13.49 as of Nov 19, 2026 ★★★★★ our rating In Stock
Cricut

Basic Tool Set, 5 Piece

A weeder, a scraper for burnishing, tweezers, a spatula and scissors in one set. The weeder and scraper are the two tools you will reach for on every stencil, cut by hand or by machine. Sold by Amazon. About $13.49, 4.9 stars from 45,531 ratings.

We like

  • Weeder and scraper included
  • Works with any vinyl

Know this

  • Scissors are small
#1 Precision Knife with 5 Blades
Budget pick $9.99as of Nov 19, 2026 ★★★★
X-ACTO

#1 Precision Knife with 5 Blades

The classic pen-sized craft knife for cutting stencils by hand. Fine tip for tight curves and small letters, and replacement blades are cheap and sold everywhere. Sold by JA Wholesale LLC. About $9.99, 4.7 stars from 3,746 ratings.

We like

  • Precise tip
  • Cheap blades

Know this

  • Blades dull fast on vinyl
Self-Healing Cutting Mat, 12 x 18 Inch
Specialty pick $8.99as of Nov 19, 2026 ★★★★
Anezus

Self-Healing Cutting Mat, 12 x 18 Inch

A self-healing mat with a printed grid. It keeps your craft knife from sliding, protects the table, and the grid helps you cut straight lines and center designs. Sold by Anezus Direct. About $8.99, 4.7 stars from 21,626 ratings.

We like

  • Grid for measuring
  • Protects blades and table

Know this

  • Warps if left in sun
05

Safety gear

Etching cream can burn skin and eyes, so gloves and eye protection are not optional. Use nitrile, not thin latex or vinyl gloves. Wear safety glasses at minimum, or splash goggles if you work with larger amounts or rinse in a deep sink where splashes happen. Work with a window open or a fan pulling air away from you. Keep the cream, the rinse area and your tools away from food and kids.

Green Nitrile Gloves, 8 Mil, Chemical Resistant
Best starter $26.95 as of Nov 19, 2026 ★★★★★ our rating In Stock
Gloveworks

Green Nitrile Gloves, 8 Mil, Chemical Resistant

Thicker than standard exam gloves, so they hold up better to cream and to scraping stencils. A box lasts a long time, and you can change gloves as soon as one gets cream on it. Sold by ZOOMGET. About $27, 4.7 stars from 11,401 ratings.

We like

  • Thick nitrile
  • Good grip when wet

Know this

  • Size runs small for some
SecureFit 400 Safety Glasses, Clear
Budget pick $9.59as of Nov 19, 2026 ★★★★
3M

SecureFit 400 Safety Glasses, Clear

Light, comfortable safety glasses that protect against splashes from the front and sides. Fine for small brush-on projects and for rotary engraving dust. Sold by Amazon. About $9.59, 4.2 stars from 4,570 ratings.

We like

  • Light and comfortable
  • Fits most faces

Know this

  • Not sealed like goggles
Stealth Safety Goggles, Anti-Fog
Upgrade pick $18.70as of Nov 19, 2026 ★★★★
Uvex

Stealth Safety Goggles, Anti-Fog

Sealed goggles with indirect vents, made to block chemical splashes. Worth it if you etch larger pieces, rinse in a deep sink, or wear glasses that don't fit under safety glasses. Sold by Authorized New Age America Seller. About $18.70, 4.5 stars from 7,339 ratings.

We like

  • Seals around eyes
  • Fits over some glasses

Know this

  • Can fog up
06

Rotary engravers

A rotary engraver scratches the glass with a spinning diamond or carbide bit. It is slower than cream but needs no stencil, works on tight curves, and lets you shade and draw freehand. Keep the glass damp, wear safety glasses, and practice on a jar before a gift. Many people use both: cream for clean lettering and an engraver for fine detail.

A hand holding a blue handheld rotary tool

Photo by Todd Cravens on Unsplash

Engraver Rotary Tool with Stencils, 290-02
Best starter $14.48 as of Nov 19, 2026 ★★★★★ our rating In Stock
Dremel

Engraver Rotary Tool with Stencils, 290-02

A simple pen-style engraver that vibrates a carbide tip instead of spinning a bit. It is easy to control for writing names and simple line art on glass, metal and wood. Sold by Amazon. About $14.48, 4.4 stars from 7,715 ratings.

We like

  • Easy to control
  • Corded, no battery

Know this

  • Loud and buzzy
  • Lines are a bit rough
Lite 7760 Cordless Rotary Tool Kit
Upgrade pick $64.50as of Nov 19, 2026 ★★★★
Dremel

Lite 7760 Cordless Rotary Tool Kit

A cordless rotary tool with variable speed. Add diamond burrs and it handles shading, fine lines and deeper engraving on glass, plus many other craft jobs. Sold by Amazon. About $64, 4.6 stars from 10,911 ratings.

We like

  • Cordless
  • Variable speed
  • Many uses

Know this

  • Diamond bits sold separately
07

Your first month of glass etching

Glass etching is quick to learn. A month is enough to etch clean letters on a drinking glass, cut your own stencils, frost a jar or mirror, and know when cream is the wrong tool. Here's a week-by-week plan.

Two glass mugs with etched designs on top of a barrel outdoors

Photo by Elena Soroka on Unsplash

Etching is mostly prep. Clean glass, a tight stencil and a thick coat of cream give you a crisp frosted design. Rushing any of the three gives you blotches and fuzzy edges.

Week 1: Set up safely and etch one letter

Pick a spot with a window or fan, away from the kitchen counter where you prep food. Lay down newspaper. Put on nitrile gloves and safety glasses before you open the cream. Clean a plain glass with rubbing alcohol and let it dry. Press on a single premade stencil letter and rub every edge down with a craft stick. Spread the cream on thick, about 1/8 inch, so you can’t see glass through it. Wait the time on the label, then rinse it off under running water with your gloves still on.

A man engraving a decorated glass at a demonstration table
Photo by jimmyweee, CC BY 2.0, via Wikimedia Commons

Week 2: Cut your own stencils

Draw or print a simple shape and tape it under a sheet of adhesive stencil vinyl. Cut along the lines with a sharp craft knife and change blades often, because a dull blade tears vinyl. Peel out the parts you want frosted. That step is called weeding. Use transfer tape to move the stencil onto the glass, then burnish it hard. Look at it from the inside of the glass for bubbles or lifted edges and fix them before the cream goes on.

A green grid cutting mat on a craft table
Photo by Zach Camp on Unsplash

Week 3: Bigger pieces and jars

Try a mason jar, a vase or a small mirror. Larger areas need more cream and an even layer, so use a foam brush and work quickly. Halfway through, stir the cream gently with the brush to keep the etch even. For a mirror, etch the front glass side, not the silver backing. Rinse until no grit is left and peel the stencil under water.

A round glass piece with a simple etched house outline
Photo by HruzovaKarolina, CC BY-SA 4.0, via Wikimedia Commons

Week 4: Curves, shading and when to switch tools

Tight curves like wine glass stems make stencils wrinkle. Cut small relief slits in the vinyl so it lies flat. If you want fine shading, freehand lines or deep carving, try a rotary engraver with a diamond bit instead of cream. Wear safety glasses and keep the glass damp to cut down on dust. By the end of the month you’ll have a box of practice glasses and a good sense of which tool fits which project.

Black and white photo of two people holding up wine glasses etched with names
Photo by Fray Bekele on Unsplash

Need the gear? Our glass etching gear guide covers etching cream, stencil vinyl, cutting and weeding tools, gloves and goggles, and rotary engravers. You might also like stained glass, Cricut crafting and laser engraving.

08

What you don't need yet

Beginners get pressured to buy a lot of stuff that doesn't help them. Here's what we'd skip on day one.

  • A sandblasting cabinet It gives deep, carved etching, but needs an air compressor and a dust setup. Cream covers most gift projects.
  • A cutting machine A craft knife and premade stencils are fine for your first dozen glasses. Buy a Cricut once you want custom names.
  • Fancy glassware Practice on thrift store glasses and empty jars. Save the nice set until your stencils come out clean.
  • A large jar of cream A small 3 oz bottle covers dozens of mugs and glasses if you apply it thick and only where needed.
09

Your first seven days

A short, real plan to get from gear-on-doorstep to actually doing it.

  1. Buy a small bottle of etching cream, nitrile gloves and safety glasses.
  2. Read the safety data sheet for your cream so you know what is in it and what to do if it touches skin.
  3. Clean a plain drinking glass with rubbing alcohol so the stencil sticks and the cream etches evenly.
  4. Etch a simple premade stencil, like a single letter, and time it by the directions on the bottle.
  5. Cut your own stencil from adhesive vinyl with a craft knife and etch it on a jar.
  6. Test etch the bottom of a Pyrex dish or tempered glass to see how weakly it frosts.
10

What it costs

Budget start
$40
Typical
$90

A small bottle of etching cream, a roll of stencil vinyl, a craft knife, a weeding tool, nitrile gloves and safety glasses come to about $40. Add a larger reusable cream and a tool kit for about $90. A rotary engraver adds about $40.

11

Common questions

Is glass etching cream dangerous?

It can be. Most creams contain bifluoride salts that burn skin and eyes and release irritating fumes. Wear nitrile gloves and eye protection, work with ventilation, and wash any contact off with running water for several minutes. Read the safety data sheet before you start.

How long do I leave etching cream on?

Follow the label. Armour Etch is usually left on for a few minutes, while Etchall is left on for about 15 minutes. Leaving it much longer does not make a deeper etch. It just raises the chance of the cream creeping under the stencil.

Why did my etching come out blotchy?

Usually the glass was not clean, the cream was spread too thin, or the glass is borosilicate or coated. Clean with rubbing alcohol, apply a thick, even layer, and stir it gently with a brush halfway through.

Is etched glass dishwasher safe?

Yes. Acid etching changes the glass surface itself, so it will not wash off or fade. The frosted area can hold grease and fingerprints, so a quick scrub helps keep it looking clean.

Can I etch with a Cricut?

A Cricut or Silhouette cuts the stencil, not the glass. Cut adhesive stencil vinyl, weed out the parts you want frosted, transfer it to the glass, then apply cream by hand.

Browse by category
Authoritative sources